RhinoMarine 3.5.0 Hydrostatics & Stability Report



General Model Information
November 18, 2006 02:44:14 PM Version: RhinoMarine 3.5.0
Company Project Description
Walk On Water Designs Diva 40' Tri Ama
Parts Mirrored Up Direction Fluid Density Refinement Trimming
Yes Positive 64.045 pounds/feet^3 N/A N/A
File Type Path
Model C:\Documents and Settings\Admin\Desktop\phil's tri\Model\ama.oct 7.3dm
HTML Output C:\Program Files\Proteus Engineering\RhinoMarine\default.htm

Upright Condition
Flotation Plane Definition Units (feet)
Constant N (longitudinal) N (transverse) N (vertical)
2.333 0.000 0.000 1.000
Overall Dimensions Units (feet)
Name Value Min Max
Length OA 40.000 0.000 40.000
Length WL 40.000 0.000 40.000
Beam OA 2.403 -1.202 1.202
Beam WL 2.372 -1.186 1.186
Depth 4.754
Freeboard 2.427
Draft 2.327
Integrated Properties Units ( feet, feet^2 , feet^3 , pounds)
Name Value Name Value
Volume 101.234 Displacement 6,483.500
LCB 17.255 LCB/LWL 0.431
TCB 0.000 VCB 1.478
Max Section Area 4.228 Long'l Loc Max Area 13.889
Wetted Surface 174.096 Wetted Centroid (longitudinal) 17.320
Wetted Centroid (transverse) 0.000
Wetted Centroid (vertical) 1.236
Displacement-Length Ratio 45.225
Waterplane Properties Units ( feet, feet^2 , feet^3 , pounds/in, feet-pounds/in)
Name Value Name Value
LCF 20.344 LCF/LWL 0.509
TCF 0.000 VCF 2.333
M Trans -0.623 M Long 69.507
BM Trans 0.233 BM Long 70.363
Area WP 71.539 Weight to Immerse 381.810
Moment to Trim 938.850 Metacentric Shelf Slope 0.027
Neutral Axis Angle 0.000° Metacentric Shelf Intercept 1.236
Form Coefficients Units (N/A)
Name Value Name Value
Cb 0.458 Cwp 0.754
Cx 0.766 Cp 0.599
Cp aft 0.558 Cp fwd 0.686
Station Data Units ( feet, feet^2 )
Plane Const Wetted Girth Immersed Area Plane Const Wetted Girth Immersed Area
0.000 0.000 0.000 0.000 0.028 0.000
1.000 4.569 0.873 2.000 4.793 1.399
3.000 4.946 1.836 4.000 5.072 2.230
5.000 5.184 2.594 6.000 5.284 2.927
7.000 5.374 3.229 8.000 5.453 3.497
9.000 5.520 3.725 10.000 5.572 3.911
11.000 5.607 4.054 12.000 5.625 4.155
13.000 5.624 4.212 14.000 5.603 4.228
15.000 5.562 4.203 16.000 5.501 4.142
17.000 5.420 4.046 18.000 5.318 3.921
19.000 5.200 3.772 20.000 5.068 3.605
21.000 4.925 3.426 22.000 4.776 3.241
23.000 4.622 3.055 24.000 4.465 2.869
25.000 4.305 2.683 26.000 4.143 2.499
27.000 3.977 2.317 28.000 3.809 2.137
29.000 3.638 1.960 30.000 3.464 1.786
31.000 3.288 1.617 32.000 3.109 1.452
33.000 2.927 1.292 34.000 2.743 1.139
35.000 2.556 0.991 36.000 2.365 0.851
37.000 2.172 0.719 38.000 1.975 0.596
39.000 1.775 0.483 40.000 1.572 0.380
40.000 0.000 0.000

Notes
  1. Dimensions are given relative to coordinate system origin, except for M Trans and M Long which are given relative to the resultant waterplane.
  2. Accuracy of calculations is affected by the density of points in the surface mesh.
  3. All coefficients are based on LWL and maximum draft above.
  4. The accuracy of the sectional area curve, maximum section area and location, and prismatic and midship section coefficients are affected by the surface mesh density, and the number and location of defined stations. In addition, for trimmed waterplanes the sections are no longer exactly perpendicular to the waterplane, also affecting accuracy.
  5. The displacement-length ratio is defined as the computed vessel displacement in long tons divided by the cube of one-hundredth of the waterline length in feet.
  6. The moment to change trim is computed with the assumption that the center of gravity is at the flotation plane.